JTBarlow's latest activity

  • JTBarlow
    JTBarlow replied to the thread 2026 Update.
    Ah, I see! Just checked the order page and it does show 2.0s, but parts shows the 2.5s Front 2.0 QS3s: Rear 2.5 QS3s: I’m going to...
    • IMG_9748.webp
    • IMG_9749.webp
  • JTBarlow
    IMG_9749.webp
  • JTBarlow
    IMG_9748.webp
  • JTBarlow
    JTBarlow reacted to SNWMBL's post in the thread 2026 Update with Like Like.
    I read it first on Facebook and then went to the Polaris website to double check and the specs for the 26 say 2.0” for the rear shocks...
  • JTBarlow
    JTBarlow replied to the thread 2026 Update.
    Don’t know where you’re hearing they put 2.0s on the rear, but the parts breakdown on Polaris’ site still shows the same part #s on the...
  • JTBarlow
    Ouch on the tire, but at least it was loading up rather than out on the trail!
  • JTBarlow
    Finally got a good ride in at Crossbar ORV park in Davis OK. 6 1/2 hour ride and covered about 16 miles. 70% of it was rocky and some...
  • JTBarlow
    JTBarlow replied to the thread 2026 Update.
    If they want to improve the A/C, they need to add rear seat ducting. And maybe plug a few air gaps around the cab.
  • JTBarlow
    JTBarlow reacted to johndeerefarmer's post in the thread 2026 Update with Like Like.
    Somebody on one of the FB groups claimed the AC had been improved by Polaris adding a 2 piston compressor. I compared part numbers and...
  • JTBarlow
    JTBarlow reacted to DogRunner2's post in the thread Stuck Winch with Like Like.
    Nice.I added the remote module but haven't tried it.
  • JTBarlow
    JTBarlow replied to the thread Stuck Winch.
    no. All the remote upgrade does is changes out the controller box. The auto stop works the same.
  • JTBarlow
    JTBarlow replied to the thread Stuck Winch.
    I replaced one on an Xpedition that did that same thing. I had to cut the rope off behind the fairlead plate to get it to spool. The...
  • JTBarlow
    JTBarlow reacted to 322's post in the thread 2026 Update with Like Like.
    I do not know what if any difference between the 25 and 26 models, but this is my 26 that I picked up yesterday from Cochise Motorsports...
  • JTBarlow
    JTBarlow reacted to WITodd's post in the thread Front drive shaft...? with Like Like.
    Here's a little info for everyone on the driveshaft phasing. I know a Polaris engineer who was the head of his dept and worked with...
  • JTBarlow
    I do carry a spare and highlift jack as well as a scissor jack, as most of our trips are backpacking thru the UP of Michigan. And in a...
Back
Top