Rigid driving lights

[shawn0606]

Anyone know anything about these lights/wiring it’s a very clean look and would like to get them. Cannot find them on the website

 

[tarkenton09]

Anyone know anything about these lights/wiring it’s a very clean look and would like to get them. Cannot find them on the website

I’ve seen that they’re expensive

 

[JTBarlow]

Anyone know anything about these lights/wiring it’s a very clean look and would like to get them. Cannot find them on the website

RIGID® SR-M-Series Pro Driving LED Lights, Pair | Polaris XPEDITION

Upgrade your vehicle's lighting with the RIGID® SR-M-Series Pro Driving LED Lights. These high-quality lights integrate into stock or HD front bumpers and provide su.

www.polaris.com

They’re also available from Fueled UTV and a couple others. The Xpeditions are already pre-wired for these and just need a switch and Y harness. The switch plug is located behind the dash near the headlight switch and the light harness plug is located in front of the radiator on the driver side.

As stated, they’re rather expensive at $500… I personally just bought the switch ($65) and Y harness ($20) from Polaris and a set of GG lighting GP10s ($160 normally or occasionally $100 on sale)

If you don’t have the HD bumper, the Rigid lights include a bracket for installing them in the stock plastics shown in your picture.

 

[S P Bar]

I like that bumper, who makes that, if you don’t mind my asking.

 

[JTBarlow]

I like that bumper, who makes that, if you don’t mind my asking.

It’s the Polaris HD bumper for the Xpedition

Full Coverage Front Bumper | Polaris XPEDITION

Keep your ride protected with a Full Coverage Front Bumper, made from high-strength steel. This bumper works seamlessly works seamlessly with the factory 4500 lbs.

www.polaris.com

Where the grill plate is on it you can do the upgrade 6000lb high mount winch, or just leave the stock 4500lb winch like mine

 

[S P Bar]

Thanks. Nothing around here on the shelf. Have to order everything even from the dealer.

 

[Kris Sr]

Anyone know anything about these lights/wiring it’s a very clean look and would like to get them. Cannot find them on the website

Polaris Xpedition Rigid SR-M Series Pro Driving LED Lights

Polaris Rigid SR-M Series Pro Driving LED Lights. These high-quality lights integrate into stock or HD front bumpers & provide superior illumination.

fueledutv.com

 

[Ryan]

Ebay has all the Rigid SRM lights listed for much less than most and the $29 harness you need. The Aux switch from Polaris is almost as much as the lights on ebay, I paid $86 a light. I put the rigid spot-lights on and they fit perfect and work great. Saved a couple hundred bucks not buying the Polaris kit. I was all in for well under $300.

Rigid Industries 902213 SR-M Series Pro Spot Light | eBay

SR-M Series Pro Spot Light. SR-M Series Pro Spot Light; Surface Mount; Hybrid; 10 Degree; 2 White LEDs; Black Rectangular Housing; Single;. Rigid Industries started in the garage of the CEO Jason Christiansen.

www.ebay.com

 

[Raptorick]

I just adapted the Amazon Nilight Amber $29 by sanding them with a belt sander to reduce the size and make them rounder. I used an L bracket and attached them to the bottom plastic piece.

 

[Dale's Snake Pit]

RIGID® SR-M-Series Pro Driving LED Lights, Pair | Polaris XPEDITION

Upgrade your vehicle's lighting with the RIGID® SR-M-Series Pro Driving LED Lights. These high-quality lights integrate into stock or HD front bumpers and provide su.

www.polaris.com

They’re also available from Fueled UTV and a couple others. The Xpeditions are already pre-wired for these and just need a switch and Y harness. The switch plug is located behind the dash near the headlight switch and the light harness plug is located in front of the radiator on the driver side.

As stated, they’re rather expensive at $500… I personally just bought the switch ($65) and Y harness ($20) from Polaris and a set of GG lighting GP10s ($160 normally or occasionally $100 on sale)
View attachment 2202View attachment 2203
If you don’t have the HD bumper, the Rigid lights include a bracket for installing them in the stock plastics shown in your picture.

Jt, do you happen to have the part# to the rocker switch from Polaris?

 

[B's FAB]

B's FAB will have a plug and play kit available VERY soon!

 

[Dale's Snake Pit]

B's FAB will have a plug and play kit available VERY soon!

View attachment 5882

How soon?

 

[JTBarlow]

Jt, do you happen to have the part# to the rocker switch from Polaris?

Here’s the parts breakdown.

 

[JTBarlow]

B's FAB will have a plug and play kit available VERY soon!

View attachment 5882

Curious if you’re going to have the K-Series Style Switch or an adapter. It’d be really nice to have a less expensive alternative to Polaris

 

[B's FAB]

How soon?

Not positive but hopefully in 2-3 weeks, the Polaris witch is still on backorder but we may offer if without the switch until the switch becomes available for those that want to figure out there own switch.

 

[B's FAB]

Curious if you’re going to have the K-Series Style Switch or an adapter. It’d be really nice to have a less expensive alternative to Polaris

Initially the kit will be sold with the Polaris switch until someone figures out a nice adapter.